Tilda Publishing
HYPERBOLA - 6
Tilda Publishing
Autonomous gas fire extinguishing systems for electric sockets and cable channels
Autonomous fire extinguishing system "HYPERBOLA-6" (hereinafter - HYPERBOLA) is intended for localization and extinguishing fires of
- solid combustible substances and materials (class A);
- flammable liquids or meltable solids and materials (class B);
- electrical equipment that is under voltage (class E).
The system is recommended to be used for protection of equipment in a volume up to 0.002 m 3 with a leakage parameter of no more than 0.2 m-1 (calculated as the ratio of the total area of permanently open holes to the volume).
The system is used as a stand-alone unit. It can be mounted both during the electrical assembly works and after their completion.
The system is delivered in transport form for placement in an installation box with a diameter of 5 cm. Recommended for placement in initial transport form also in other volumes. Still, the system can be reshaped for matching other patterns of electrical system at any time.
The system is manufacted in accordance with Technical Conditions 4854-015-13525135-2015.
- solid combustible substances and materials (class A);
- flammable liquids or meltable solids and materials (class B);
- electrical equipment that is under voltage (class E).
The system is recommended to be used for protection of equipment in a volume up to 0.002 m 3 with a leakage parameter of no more than 0.2 m-1 (calculated as the ratio of the total area of permanently open holes to the volume).
The system is used as a stand-alone unit. It can be mounted both during the electrical assembly works and after their completion.
The system is delivered in transport form for placement in an installation box with a diameter of 5 cm. Recommended for placement in initial transport form also in other volumes. Still, the system can be reshaped for matching other patterns of electrical system at any time.
The system is manufacted in accordance with Technical Conditions 4854-015-13525135-2015.
Technical specifications
№
s/n
s/n
Parameter
Unit
Ignition and fire classes
-
Solids, Liquids, Electr. Eq.
1
m3
2
Maximum protected volume
0.002
Maximum value of the leakage parameter
Full weight
Fire extinguishing agent weight
Length
Maximum bending diameter
Operating temperature
Activation temperature
Maximum reasonable nominal
voltage of the protected
equipment
voltage of the protected
equipment
System activation speed
(forced start)
(forced start)
Fire extinguishing agent release time after activation
Life time
3
4
5
6
8
9
10
11
12
13
14
m-1
g
g
mm
m
°С
°С
kV
s
s
year
0.2
3 ± 0,5
2 ± 0,5
20 ± 2
0.05
from – 40 to + 60
from + 120 to + 150
10
5
1
10
7
Diameter
mm
6 ± 0,2
15
Vibration resistance
-
The system is resistant to vibration impact, according
to a typical "traffic shake",
and can be transported by
all types of transport at
any distance
to a typical "traffic shake",
and can be transported by
all types of transport at
any distance
Value
Fire extinguishing by Hyperbola in burning socket
